Hypertherm Powermax 30 XP 4.5M S/N 30XP-114079 Case

Stock Code: 088083

Contact office for availability

Descriptions

The Hypertherm Powermax 30 XP Plasma Cutter is a highly portable cutting system that can handle a wide range of applications. This Powermax 30 XP Plasma System features a unique two-in-one design provides high-power capability for thick metal cutting along with FineCut consumables which provide detailed, thin metal cutting. The versatile 30 amp system on this Powermax 30 XP Plasma Cutter uses air or nitrogen to cut electrically conductive metals including mild steel, stainless steel or aluminium.

The Hypertherm Powermax 30 XP Plasma System is suitable for use in an extensive selection of applications including fine feature cutting, drag cutting and many more. Contact us today if you require further information or have any questions regarding the Hypertherm Powermax 30 XP Plasma Cutters available to purchase here at Sphinx Industrial Supplies.

Input voltages	120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW	120-240 V, 1-PH, 25-18.8 A
Output current	15-30 A
Rated output voltage	125 VDC
Duty cycle @ 40°C (104°F)	35%, 240 V 20%, 120 V
Open circuit voltage (OCV)	256 VDC
Dimensions with handles	356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H
Weight w/ 4,5 m (15') torch	CSA: 9.7 kg (21.4 lbs) CE, CCC: 9.5 kg (21 lbs)
Gas Supply	Clean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate / pressure	113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length	3 m (10')
Power supply type	Inverter - IGBT
Engine drive requirement	5.5 kW for full 30 A output
Certifications	CSA-certified for use in the Americas and Asia, except China CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. CCC for use in China.
Warranty	Power supplies have a 3-year warranty and torches a 1-year warranty.